1:24 Art deco side table kit
This kit is an Art deco 1930s side or hall table with etched details.
The photo shows the unpainted table included in the kit, after it has been put together. The kit is laser cut from quality plywood and lime wood. The original was made from different coloured woods, hence the etched lines on the kit. Stain the parts in different colours for a great look.
The table when made up is approximately 53mm wide x 23mm deep x 31mm high.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, paints or stains and brushes to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.
**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**
This kit is an Art deco 1930s side or hall table with etched details.
The photo shows the unpainted table included in the kit, after it has been put together. The kit is laser cut from quality plywood and lime wood. The original was made from different coloured woods, hence the etched lines on the kit. Stain the parts in different colours for a great look.
The table when made up is approximately 53mm wide x 23mm deep x 31mm high.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, paints or stains and brushes to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.
**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**
This kit is an Art deco 1930s side or hall table with etched details.
The photo shows the unpainted table included in the kit, after it has been put together. The kit is laser cut from quality plywood and lime wood. The original was made from different coloured woods, hence the etched lines on the kit. Stain the parts in different colours for a great look.
The table when made up is approximately 53mm wide x 23mm deep x 31mm high.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, paints or stains and brushes to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.
**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**