1:24 Batty chair kit
This kit makes cute little bat themed chair, perfect for your mini witch, Halloween or haunted house. There is also a matching table, shown in the last photo with the chair.
The first three photos show the painted finished chair and the fourth and fifth photos show the unfinished chair as it is made up. The last photo shows the chair and matching table together. The kit is laser cut from a quality ply and bass/limewood.
Finished size is approximately 5.2cm high, 2.3cm wide and 2.4cm deep.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper and paints and brushes to finish this kit.
This kit makes cute little bat themed chair, perfect for your mini witch, Halloween or haunted house. There is also a matching table, shown in the last photo with the chair.
The first three photos show the painted finished chair and the fourth and fifth photos show the unfinished chair as it is made up. The last photo shows the chair and matching table together. The kit is laser cut from a quality ply and bass/limewood.
Finished size is approximately 5.2cm high, 2.3cm wide and 2.4cm deep.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper and paints and brushes to finish this kit.
This kit makes cute little bat themed chair, perfect for your mini witch, Halloween or haunted house. There is also a matching table, shown in the last photo with the chair.
The first three photos show the painted finished chair and the fourth and fifth photos show the unfinished chair as it is made up. The last photo shows the chair and matching table together. The kit is laser cut from a quality ply and bass/limewood.
Finished size is approximately 5.2cm high, 2.3cm wide and 2.4cm deep.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper and paints and brushes to finish this kit.