1:24 Chantilly kitchen range hood
This kit makes a range hood to go over the Chantilly stove (here), however it could go over your own mini stove or any of the others in my store. The chimney breast is separate and can be cut to fit your space or excluded if desired. This kit was designed to match with the rest of the Chantilly kitchen kits (here).
The first three photos show the finished and painted kit made up and the fourth photo shows the unpainted hood after it has been made up. The last photo shows the range hood with the Chantilly stove. The kit is laser cut from a quality ply.
The shelf with brackets measures approximately 25mm high x 58mm wide x 24mm deep. The separate chimney breast measures approximately 50mm high x 50mm wide x 6mm deep.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.
This kit makes a range hood to go over the Chantilly stove (here), however it could go over your own mini stove or any of the others in my store. The chimney breast is separate and can be cut to fit your space or excluded if desired. This kit was designed to match with the rest of the Chantilly kitchen kits (here).
The first three photos show the finished and painted kit made up and the fourth photo shows the unpainted hood after it has been made up. The last photo shows the range hood with the Chantilly stove. The kit is laser cut from a quality ply.
The shelf with brackets measures approximately 25mm high x 58mm wide x 24mm deep. The separate chimney breast measures approximately 50mm high x 50mm wide x 6mm deep.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.
This kit makes a range hood to go over the Chantilly stove (here), however it could go over your own mini stove or any of the others in my store. The chimney breast is separate and can be cut to fit your space or excluded if desired. This kit was designed to match with the rest of the Chantilly kitchen kits (here).
The first three photos show the finished and painted kit made up and the fourth photo shows the unpainted hood after it has been made up. The last photo shows the range hood with the Chantilly stove. The kit is laser cut from a quality ply.
The shelf with brackets measures approximately 25mm high x 58mm wide x 24mm deep. The separate chimney breast measures approximately 50mm high x 50mm wide x 6mm deep.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.