1:24 Debora whatnot kit
This kit is a lovely Victorian style whatnot stand or hutch, great for the mini dining room, sitting room or kitchen to display all sorts of fun little accessories. The little door opens. This is a bit more fiddly than most of my other kits and requires a little more patience but is not difficult to construct.
The first photo shows the constructed and painted whatnot and the last photo shows the unpainted whatnot after it has been constructed. The kit is laser cut from a quality ply, lime/bass wood and acrylic.
The whatnot when made up is approximately 49mm wide x 16mm deep x 98mm high.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, tweezers, and paints and brushes to finish this kit.
**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**
This kit is a lovely Victorian style whatnot stand or hutch, great for the mini dining room, sitting room or kitchen to display all sorts of fun little accessories. The little door opens. This is a bit more fiddly than most of my other kits and requires a little more patience but is not difficult to construct.
The first photo shows the constructed and painted whatnot and the last photo shows the unpainted whatnot after it has been constructed. The kit is laser cut from a quality ply, lime/bass wood and acrylic.
The whatnot when made up is approximately 49mm wide x 16mm deep x 98mm high.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, tweezers, and paints and brushes to finish this kit.
**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**
This kit is a lovely Victorian style whatnot stand or hutch, great for the mini dining room, sitting room or kitchen to display all sorts of fun little accessories. The little door opens. This is a bit more fiddly than most of my other kits and requires a little more patience but is not difficult to construct.
The first photo shows the constructed and painted whatnot and the last photo shows the unpainted whatnot after it has been constructed. The kit is laser cut from a quality ply, lime/bass wood and acrylic.
The whatnot when made up is approximately 49mm wide x 16mm deep x 98mm high.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, tweezers, and paints and brushes to finish this kit.
**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**