1:24 French cottage side chair kit

$13.80

This kit makes a French country cottage style side chair (no arms), perfect for any cottage or castle where you want a little French flair. I also have a matching chair with arms listed in my store.

The first two photos show the finished and painted chair and the third photo shows the unpainted chair after construction The kit is laser cut from a quality plywood and bass/limewood.

Finished size is approximately 49mm high x 25mm wide x 23mm deep.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

Quantity:
Add To Cart

This kit makes a French country cottage style side chair (no arms), perfect for any cottage or castle where you want a little French flair. I also have a matching chair with arms listed in my store.

The first two photos show the finished and painted chair and the third photo shows the unpainted chair after construction The kit is laser cut from a quality plywood and bass/limewood.

Finished size is approximately 49mm high x 25mm wide x 23mm deep.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

This kit makes a French country cottage style side chair (no arms), perfect for any cottage or castle where you want a little French flair. I also have a matching chair with arms listed in my store.

The first two photos show the finished and painted chair and the third photo shows the unpainted chair after construction The kit is laser cut from a quality plywood and bass/limewood.

Finished size is approximately 49mm high x 25mm wide x 23mm deep.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.