1:24 Nutcote heater kit

$19.20

This kit is a small cottage style heater or small stove with non-opening door.

The first photo shows the finished and painted heater and the second photo shows the unpainted heater after it has been made up. The kit is laser cut from a quality ply and wood.

The finished size is approximately 24mm wide x 24mm deep x 31mm high plus flue (80mm).

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**

Quantity:
Add To Cart

This kit is a small cottage style heater or small stove with non-opening door.

The first photo shows the finished and painted heater and the second photo shows the unpainted heater after it has been made up. The kit is laser cut from a quality ply and wood.

The finished size is approximately 24mm wide x 24mm deep x 31mm high plus flue (80mm).

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**

This kit is a small cottage style heater or small stove with non-opening door.

The first photo shows the finished and painted heater and the second photo shows the unpainted heater after it has been made up. The kit is laser cut from a quality ply and wood.

The finished size is approximately 24mm wide x 24mm deep x 31mm high plus flue (80mm).

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**