1:24 Range surround kit
This kit makes a cottage style range surround. It has been made specifically to fit my cottage range (you will have to trim a little off the range's flue to fit inside the surround).
The finished exterior dimensions of the surround are approximately 5.8cm wide, 3cm deep and 8.8cm high. The interior/opening dimensions are approximately 4cm wide, 6.8cm high (at the lowest point of the opening) and about 2.4cm deep.
The first three photos show the finished and painted surround, with the cottage range (available separately) and the last photo shows the unpainted surround after it has been constructed. The kit is laser cut from quality plywood.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper and paints and brushes to finish this kit.
This kit makes a cottage style range surround. It has been made specifically to fit my cottage range (you will have to trim a little off the range's flue to fit inside the surround).
The finished exterior dimensions of the surround are approximately 5.8cm wide, 3cm deep and 8.8cm high. The interior/opening dimensions are approximately 4cm wide, 6.8cm high (at the lowest point of the opening) and about 2.4cm deep.
The first three photos show the finished and painted surround, with the cottage range (available separately) and the last photo shows the unpainted surround after it has been constructed. The kit is laser cut from quality plywood.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper and paints and brushes to finish this kit.
This kit makes a cottage style range surround. It has been made specifically to fit my cottage range (you will have to trim a little off the range's flue to fit inside the surround).
The finished exterior dimensions of the surround are approximately 5.8cm wide, 3cm deep and 8.8cm high. The interior/opening dimensions are approximately 4cm wide, 6.8cm high (at the lowest point of the opening) and about 2.4cm deep.
The first three photos show the finished and painted surround, with the cottage range (available separately) and the last photo shows the unpainted surround after it has been constructed. The kit is laser cut from quality plywood.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper and paints and brushes to finish this kit.