1:24 Small bedroom fireplace kit
This kit makes a sweet Victorian or Edwardian fireplace, complete with insert, perfect for a smaller Victorian room, such as a bedroom or study.
The first photo shows the finished and painted fireplace and the last two photos show the unpainted fireplace made up. The kit is laser cut from quality ply.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.
Finished dimensions are 5.8cm wide, 5.2cm high and 1.3cm deep. Note: your fireplace will require a space of at least 11mm deep, 45mm high and 21mm wide behind a wall or chimney breast.
This kit makes a sweet Victorian or Edwardian fireplace, complete with insert, perfect for a smaller Victorian room, such as a bedroom or study.
The first photo shows the finished and painted fireplace and the last two photos show the unpainted fireplace made up. The kit is laser cut from quality ply.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.
Finished dimensions are 5.8cm wide, 5.2cm high and 1.3cm deep. Note: your fireplace will require a space of at least 11mm deep, 45mm high and 21mm wide behind a wall or chimney breast.
This kit makes a sweet Victorian or Edwardian fireplace, complete with insert, perfect for a smaller Victorian room, such as a bedroom or study.
The first photo shows the finished and painted fireplace and the last two photos show the unpainted fireplace made up. The kit is laser cut from quality ply.
Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.
You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.
Finished dimensions are 5.8cm wide, 5.2cm high and 1.3cm deep. Note: your fireplace will require a space of at least 11mm deep, 45mm high and 21mm wide behind a wall or chimney breast.