1:48 Nutcote heater kit

$15.00

This kit makes a very cute small cottage style heater or small stove with non-opening door for your 1:48 scene.

The first two photos show the painted finished kit, and the last photo shows the unpainted kit after it has been constructed. The kit is laser cut from a quality ply and wood.

The finished size is approximately 13mm wide x 13mm deep x 15mm high plus flue (56mm tall in total).

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

Quantity:
Add To Cart

This kit makes a very cute small cottage style heater or small stove with non-opening door for your 1:48 scene.

The first two photos show the painted finished kit, and the last photo shows the unpainted kit after it has been constructed. The kit is laser cut from a quality ply and wood.

The finished size is approximately 13mm wide x 13mm deep x 15mm high plus flue (56mm tall in total).

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.

This kit makes a very cute small cottage style heater or small stove with non-opening door for your 1:48 scene.

The first two photos show the painted finished kit, and the last photo shows the unpainted kit after it has been constructed. The kit is laser cut from a quality ply and wood.

The finished size is approximately 13mm wide x 13mm deep x 15mm high plus flue (56mm tall in total).

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit.