1:24 Nightshade Cottage kit
This is a sweet but simpler Halloween or witch themed cottage kit designed to sit flat against a wall if desired. Everything you see in the unfinished kit photos is included, including doors and door handles, a fireplace and an optional box bed in the attic. The cottage has generous room sizes with optional dividing wall on the ground floor and optional bathroom on the first floor. The cottage is decorated with my own little spooky designs including a spider web feature window, Gothic inspired details and bat cut-outs. The detail parts are wonky for a haunted house look.
The kit is made from quality 3mm plywood for the main structure and thinner ply and card for the detail parts. Laser cut acrylic or styrene is provided for window glass. All parts are precision laser cut, and the tab and slot construction gives a neat finish for even inexperienced builders. Detailed instructions with photos are provided, and I am available if you have any questions before, during or after construction.
The house measures approximately 40cm wide x 18.3cm deep x 36.6cm high (plus chimney).
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper and a pencil to finish this kit. Clamps or masking tape can also be useful. It can then be decorated using acrylic paints or other media as desired. I have included hints and tips on decorating in the instructions to make this easier for you.
This kit is not suitable for small children. It is a kit and therefore must be put together by the purchaser.
This is a sweet but simpler Halloween or witch themed cottage kit designed to sit flat against a wall if desired. Everything you see in the unfinished kit photos is included, including doors and door handles, a fireplace and an optional box bed in the attic. The cottage has generous room sizes with optional dividing wall on the ground floor and optional bathroom on the first floor. The cottage is decorated with my own little spooky designs including a spider web feature window, Gothic inspired details and bat cut-outs. The detail parts are wonky for a haunted house look.
The kit is made from quality 3mm plywood for the main structure and thinner ply and card for the detail parts. Laser cut acrylic or styrene is provided for window glass. All parts are precision laser cut, and the tab and slot construction gives a neat finish for even inexperienced builders. Detailed instructions with photos are provided, and I am available if you have any questions before, during or after construction.
The house measures approximately 40cm wide x 18.3cm deep x 36.6cm high (plus chimney).
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper and a pencil to finish this kit. Clamps or masking tape can also be useful. It can then be decorated using acrylic paints or other media as desired. I have included hints and tips on decorating in the instructions to make this easier for you.
This kit is not suitable for small children. It is a kit and therefore must be put together by the purchaser.
This is a sweet but simpler Halloween or witch themed cottage kit designed to sit flat against a wall if desired. Everything you see in the unfinished kit photos is included, including doors and door handles, a fireplace and an optional box bed in the attic. The cottage has generous room sizes with optional dividing wall on the ground floor and optional bathroom on the first floor. The cottage is decorated with my own little spooky designs including a spider web feature window, Gothic inspired details and bat cut-outs. The detail parts are wonky for a haunted house look.
The kit is made from quality 3mm plywood for the main structure and thinner ply and card for the detail parts. Laser cut acrylic or styrene is provided for window glass. All parts are precision laser cut, and the tab and slot construction gives a neat finish for even inexperienced builders. Detailed instructions with photos are provided, and I am available if you have any questions before, during or after construction.
The house measures approximately 40cm wide x 18.3cm deep x 36.6cm high (plus chimney).
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper and a pencil to finish this kit. Clamps or masking tape can also be useful. It can then be decorated using acrylic paints or other media as desired. I have included hints and tips on decorating in the instructions to make this easier for you.
This kit is not suitable for small children. It is a kit and therefore must be put together by the purchaser.