1:24 Cast iron bed kit

$30.00

This kit is a cute single sized cast iron bed with sweet little etched details.

Finished measurements are approximately 52mm wide x 66mm high x 97mm long.

The first two photos show the bed finished and painted and the third photo shows the unpainted bed after it has been put together. The kit is laser cut from quality plywood.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints and brushed to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.

Add To Cart

This kit is a cute single sized cast iron bed with sweet little etched details.

Finished measurements are approximately 52mm wide x 66mm high x 97mm long.

The first two photos show the bed finished and painted and the third photo shows the unpainted bed after it has been put together. The kit is laser cut from quality plywood.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints and brushed to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.

This kit is a cute single sized cast iron bed with sweet little etched details.

Finished measurements are approximately 52mm wide x 66mm high x 97mm long.

The first two photos show the bed finished and painted and the third photo shows the unpainted bed after it has been put together. The kit is laser cut from quality plywood.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints and brushed to finish this kit. Small clamps, rubber bands or tape may also be useful to help hold things together whilst glue dries.