1:24 Victoria bedside table
This kit makes a Victorian Eastlake style bedside table or nightstand. I also have a matching wardrobe, bed and dresser listed in my store. The photo shows the finished but undecorated bedside as it is made up from the kit.
The kit is laser cut from a quality ply and card. The finished bedside measures approximately 25mm wide x 18mm deep x 37mm high. Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. This kit is not suitable for small children as it contains very small and fragile parts. It is a kit and therefore must be put together by the purchaser.
This kit makes a Victorian Eastlake style bedside table or nightstand. I also have a matching wardrobe, bed and dresser listed in my store. The photo shows the finished but undecorated bedside as it is made up from the kit.
The kit is laser cut from a quality ply and card. The finished bedside measures approximately 25mm wide x 18mm deep x 37mm high. Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. This kit is not suitable for small children as it contains very small and fragile parts. It is a kit and therefore must be put together by the purchaser.
This kit makes a Victorian Eastlake style bedside table or nightstand. I also have a matching wardrobe, bed and dresser listed in my store. The photo shows the finished but undecorated bedside as it is made up from the kit.
The kit is laser cut from a quality ply and card. The finished bedside measures approximately 25mm wide x 18mm deep x 37mm high. Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.
The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them. You will need a fine craft knife, wood working glue, sandpaper, tweezers and paints to finish this kit. This kit is not suitable for small children as it contains very small and fragile parts. It is a kit and therefore must be put together by the purchaser.