1:24 Nutcote bedside kit

$9.60

This is a 1:24 scale dollhouse furniture kit for the adult collector to construct. It is a cute little bedside chest with floral design cut-out, made especially for the Nutcote cottage kit, but would look equally cute in any cottage or vintage setting.

The first two photos show the finished and painted table and the third photo shows the unpainted table after it has been made up. The kit is laser cut from a quality plywood.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The bedside when made up is approximately 27mm high x 26mm wide x 17mm deep.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, superglue, sandpaper, tweezers, wire cutters and paints and brushes to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**

Quantity:
Add To Cart

This is a 1:24 scale dollhouse furniture kit for the adult collector to construct. It is a cute little bedside chest with floral design cut-out, made especially for the Nutcote cottage kit, but would look equally cute in any cottage or vintage setting.

The first two photos show the finished and painted table and the third photo shows the unpainted table after it has been made up. The kit is laser cut from a quality plywood.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The bedside when made up is approximately 27mm high x 26mm wide x 17mm deep.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, superglue, sandpaper, tweezers, wire cutters and paints and brushes to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**

This is a 1:24 scale dollhouse furniture kit for the adult collector to construct. It is a cute little bedside chest with floral design cut-out, made especially for the Nutcote cottage kit, but would look equally cute in any cottage or vintage setting.

The first two photos show the finished and painted table and the third photo shows the unpainted table after it has been made up. The kit is laser cut from a quality plywood.

Detailed instructions with photos are provided, and I can be contacted if you have any questions before, during or after construction.

The bedside when made up is approximately 27mm high x 26mm wide x 17mm deep.

The parts are very small and fragile and must be handled carefully, however the finish you should attain will be amazing if you are careful with them.

You will need a fine craft knife, wood working glue, superglue, sandpaper, tweezers, wire cutters and paints and brushes to finish this kit.

**PLEASE READ SHIPPING AND OTHER POLICIES PRIOR TO PURCHASING. If you have any questions, please ask.**